Choose GPower – the Highest Certified for Test [TestStand]

Do you need a new test system? At GPower, we have many years of experience in developing specialized test systems for everything from production environments to development departments. The many years of experience are also supported by the fact...

Continue reading

What Is NIWeek, and Why Should You Attend? [NIWeek 2019 – 3:3]

NIWeek is much more than just a presentation of new features and products that you can use when solving tomorrow's challenges. It is also a great place to be updated and inspired by other developers, which I will be focusing on in the third and...

Continue reading

New Features in TestStand [NIWeek 2019 – 2:3]

This is the second blog post in the mini-series about NIWeek 2019. While the first blog post was about new features in LabVIEW, the second one is about new features in TestStand. Here, I will summarize the most important news from TestStand 2019...

Continue reading

New Features in LabVIEW 2019 [NIWeek 2019 – 1:3]

As mentioned earlier, GPower attended NIWeek 2019 in Austin, Texas – and there is lots of news from there! News that hopefully can help to inspire your department in terms of new and exciting solutions. Based on our field, I have summarized some...

Continue reading

Experience NIWeek 2019 in a Short Video!

Did you miss NIWeek in Austin? Here, we will offer you an insight into an extremely eventful week. A week with everything from technical sessions to networking events!   

Continue reading

NIWeek 2019 Is Now On!

NIWeek, which is a four days test, design, and development conference, is now on in Austin! As one of the leading and most specialized LabVIEW companies in Northern Europe, we are, of course, represented by technical and commercial employees at...

Continue reading

Two Tech Leads Are Part of a New Setup!

As we continue to expand the number of employees, we have just introduced two new Tech Leads as part of a new GPower setup. Read more about the new setup in this blog post. 

Continue reading

An Exclusive LabVIEW Group Is Gathered at GPower [ALUG DK]

Today, some of Denmark's best LabVIEW users are gathered in order to share experiences related to advanced LabVIEW programming. The group named Advanced LabVIEW User Group Denmark (ALUG DK) meets approximately twice a year – and this time, GPower...

Continue reading

CLA Summit 2019 [Certified LabVIEW Architects]

In this week, GPower has attended the European Certified LabVIEW Architect (CLA) Summit. An event that brings together some of the world’s best NI LabVIEW programmers to discuss new features, architectures, and network with other CLAs and members...

Continue reading

GPower Welcomes a New Intern

From March 25, 2019, Lasse Thorfinn Jagd will also be part of the GPower team. While Lasse Thorfinn will start as an intern, we expect that the internship will result in a permanent employment.

Continue reading

An Intensive Focus on Educating Employees! [LabVIEW and TestStand]

At GPower, we continue to increase the number of certifications in terms of LabVIEW and TestStand. In addition to three of our team members becoming newly Certified LabVIEW Developers (CLDs), we are also proud to announce that we now have one...

Continue reading

Alliance Day 2019 [National Instruments]

Over the next few days, our CTO and CEO attend National Instruments' (NI) Northern European Alliance Day. They look, among other things, forward to hearing more about NI's strategies for 2019 in relation to the partner program.

Continue reading

Did You Know that We Are Specialists in Developing Test Systems?

Do your manufacturing processes, development branch, or lab include testing? If not, read here why you should start testing! As a result, you will not only save time and money…   

Continue reading

GPower Starts Offering Courses and Certifications! [TestStand]

Previously, we could disclose that National Instruments (NI) has chosen us to offer courses and certification exams for LabVIEW and TestStand. A new chapter, we have started in earnest this week when offering an extended TestStand course that can...

Continue reading

Two Strong Profiles Become Part of the GPower Team!

From February 1, 2019, our development department will once again be expanded! And this time, the expansion is not only made of one but two strong profiles consisting of the engineer, Mads Grunnet Askholt (left), and the physicist, Poul Lindholm...

Continue reading

GPower Offers LabVIEW and TestStand Certifications [National Instruments]

With in-house titles such as NI Certified Professional Instructor and LabVIEW Champion, it is now possible for GPower to hold National Instruments’ LabVIEW and TestStand certification exams. 

Continue reading

A Year in Review: A Christmas Greeting from GPower

2018 has been an eventful year for GPower with many new employees, customers, and further development of own products and test concepts. However, we expect even more of 2019! In this blog post, our CEO will emphasize some of the highlights of...

Continue reading

The Final Round of GPower’s Baking Battle Has Just Begun!

Even though we are busy, there should always be room for fun and enjoyment! This is GPower’s philosophy! Lately, we have organized a cake competition that started as a cozy and an enjoyable project. However, before we knew it, the cozy project...

Continue reading

16 Xeon Cores for Embedded Real Time [PXI Controllers]

Just another day at the GPower offices. A couple of National Instruments’ fastest PXI controllers have just arrived at our office this morning! NDAs prevents us from telling exactly what it is for unfortunately. That said, we can tell you that it...

Continue reading

GPower Attends Nordic Test Forum 2018 [Conference]

Over the next couple of days, engineers, technicians, and decision makers from the Nordic countries will meet in Snekkersten, Denmark. This is due to the annual conference Nordic Test Forum (NTF). At the conference, the latest technologies,...

Continue reading

Get High-quality Controllers at Affordable Prices! [CompactRIO]

Previously, a high-quality controller has rapidly reached 30-40,000 Danish kroner. However, this tendency does not have to be the case anymore as National Instruments has released a new series of cRIO models at completely different prices than...

Continue reading

Want to Become a Better LabVIEW Developer? [Download Free Trial Versions]

Do you want to become a better LabVIEW developer and develop programs in high quality and with high performance? Here, you can among other things download free guides and trial versions of our Expression Parser.

Continue reading

GPower Is Launching a New Project Page!

At GPower, we have just launched a new project page! The page will among other things give you an overview of our services, what kind of projects we are able to solve, and how our concept differs from traditional project solution. 

Continue reading

What Kind of Projects Are We Dealing With? [Read Five Use Cases]

At first sight, it can seem a bit extensive that we are dealing with projects regarding automation, simulation, and test. So, what kind of projects are we actually dealing with? By means of five use cases, we offer an insight into this question. 

Continue reading

Emil from the 8th Grade Just Finished an Internship at GPower

What does it mean to be a part of a software company? Last week, 14-year-old Emil Andersen gained insight into this question when he was an intern at GPower's headquarters in Hinnerup, Denmark. 

Continue reading

What Is LabVIEW? [National Instruments]

LabVIEW is a development environment for the graphical programming language G from National Instruments. The programming language is strong when it is used for tasks regarding test, measurement, and control. 

Continue reading

Never Leave Electronics Unattended When Developers Are Present! 😂😅

Normally, people have no need to break down hardware in smaller parts in order to see what is hiding behind the technical equipment. However, this is COMPLETELY different in terms of developers! A claim that has been confirmed once again here at...

Continue reading

How to Avoid Expensive and Endless Projects? [Test and Measurement]

Higher quality, lower costs, shorter development time, and more flexibility. These are the keywords for our project concept – a concept that moves away from traditional project solutions regarding test and measurement among others by using a...

Continue reading

GDevCon: The New Graphical Developer Conference [LabVIEW]

Over the next two days, our founder and CTO, Steen Secher Schmidt, attends “The New Graphical Developer Conference” – an international conference for LabVIEW developers.

Continue reading

TestStand – More than Just Test Execution [Software]

For almost 20 years, TestStand has existed as a product from National Instruments. I have been working with TestStand in different contexts since 2006, and I often run across the misunderstanding that TestStand is “just” a test executer. In fact,...

Continue reading

GPower: We Expect to Double the Number of Employees [Article]

Below the Danish article, you will find an English translation. Please note that the original article is written in Danish by Kian Johansen who is editor at the local newspaper, Lokalavisen Favrskov.

Continue reading

There Are No Words to Describe NIWeek – We Do It by means of Pictures

How was NIWeek, and what happened during the week in Austin? Here at the office, Martin (CEO) and Steen (CTO) were asked about such questions. However, as it can be hard to retell a week of magnificent experiences, they presented a smaller...

Continue reading

An Update from Austin! [NIWeek 2018]

We have just received an update from Austin from our CTO, Steen Secher Schmidt, and CEO, Martin Boje, who attend this year's NIWeek.

Continue reading

Aktuel Elektronik: GPower Is Much More than LabVIEW Architects [Article]

Based on our latest stories, we have reached the front page in the seventh edition of Aktuel Elektronik, a Danish electronics magazine! Read the article here, where you will also find a link to the original article! Please note that the original...

Continue reading

Michael Prisskov Lundsgaard Is GPower’s New Project Manager

As we regularly get more and bigger projects, we have hired Michael Prisskov Lundsgaard as new Project Manager for our development team from May 1, 2018.

Continue reading

Randers Amtsavis: Record Speed at GPower [Article]

”Record Speed at GPower – They Need More Employees”. That was the headline, when we had space in the business magazine in Randers Amtsavis last week. Here, you will find a translation of the article.

Continue reading

More Projects Justify More Employees

More projects and products are equivalent to more employees. At GPower, that is at any rate the case as we have tripled the staff in just six months.

Continue reading

Which Industries Do We Deal With? [Industries]

Energy, electronic production, and robotics are just a section of industries that we deal with when we for instance upgrade measuring and testing systems by means of our modular software. Learn more about our knowledge of various industries in...

Continue reading

How to Document Your Code by Using the Built-In Tools in LabVIEW?

Use a type def. cluster and a single feedback node, check conditions once from last iteration, and write only to the single value, when needed, for more clarity. Read the blog post to get more tips in terms of documentation in LabVIEW. 

Continue reading

Alliance Day 2018 in Amsterdam

Partnership, technology, and strategy are among the overall topics that we will learn more about when we attend the Northern European Alliance Day 2018 in Amsterdam tomorrow.

Continue reading

Two Physicists in Two Weeks

Welcome to Aske Thorsen – the newest addition to our development team. Aske is a physicist which also means that we have become two physicists richer at GPower in just two weeks.

Continue reading

From a Static to a Flexible Test Architecture with TestStand

How can you use TestStand to create a more flexible test architecture in a process model? In this post about production testing at DEIF, you can learn more about this topic among others.

Continue reading

Now, We Also Have a Physicist on Our Development Team

We have become an employee richer at GPower! As a result of a successful internship, Andreas Boes Jakobsen continues as a part of our development team where he is going to develop modular software for several of our new projects among other...

Continue reading

When Models Become Reality [Case]

“When Models Become Reality.” This is the headline of one of our latest simulation projects where we developed a wind turbine simulator with real-time software and hardware.

Continue reading

How Can We Rethink Software and Hardware? [GPower V. 2.0]

Besides GPower is a new way of thinking software and hardware in terms of measuring and testing for industries, GPower also aims to challenge a market-standard, we believe up until now has been too expensive and too time-consuming.

Continue reading

Andreas Is the Newest Addition to GPower

Andreas Boes Jakobsen just started an internship program in our development team. Andreas is an educated physicist from Aarhus University, and he is currently teaching physics at Aarhus Statsgymnasium.

Continue reading

When Automation of an Autoclave Reduces Costs

Read about how we helped Sirona move their manual testing processes to TestStand – a standardized test sequence manager. Additionally, we built the product test in to the production line which ended up also featuring a burn-in and repairing...

Continue reading

GPower’s Site Is Now Live in English

Our new website in English is now live and will play an important part in our new business-model which contains the ambition to further our reach outside the boundaries of Denmark.

Continue reading

New Facilities Are the Foundation of GPower’s Further Growth

By relocating ourselves a bit up Samsøvej in Hinnerup, Denmark, GPower has found the perfect surroundings to suit our current growth and the future ambitions of expansion while securing the best possible working-environment for present and future...

Continue reading

CompactRIO – Adjusting Instruments

“Building High Precision Instruments with CompactRIO”. That was the headline for one of the presentations at NIDays, and it was given by our founder and CTO, Steen Secher Schmidt. In his presentation he shared with the audience his expertise in...

Continue reading

Follow us on LinkedIn

LinkedIn Follow us

Most popular posts

Latest news

RECEIVE OUR NEWS